![background image](http://html1.mh-extra.com/html/icom/ic-f5122d/ic-f5122d_operating-manual_4285683008.webp)
5
2
dPMR OPERATION
D
Receiving a Stun, Kill or Revive
If an Individual call with a Stun or Kill command is received,
the transceiver will display “SORRY” and you can not receive*
or transmit.
* Depending on the received Stun command setting. Revive signals
can always be received.
➥
When a Stun command is received:
• The transceiver cannot be operated until an Individual call a Re-
vive command is received, or you enter a password.
➥
When a Kill command is received:
• The transceiver cannot be operated until data cloning is per-
formed. Ask your dealer for details.
NOTE:
Depending on the preprogramming, the transceiver
can ignore the Stun, Revive and Kill commands that are
from a non-specified station.
D
Receiving a Status Polling call
If a Status Polling call is received, the transceiver will auto-
matically transmit its current status.
D
Receiving an Ambience Listening call
If an Individual call with an Ambience Listening command is
received from a specified station, the transceiver will auto-
matically transmit its microphone audio.
• The HM-148G or HM-152/152T
hand
microphone
is required.
NOTE:
If the transceiver receives an Ambience Listening
command from a station other than the specified one, the
call will be ignored, and the transceiver will not transmit its
microphone audio.
D
Receiving an Emergency call
q
When an emergency call is received:
• Beeps sound.
• The state of the backlight depends on the Backlight setting in
the User Set mode. When “LIGT AUT” is selected, the backlight
turns ON for the preprogrammed time period. (Auto Backlight
Timer)
w
To clear the beep, ID and message display, turn OFF the
power or change the channel.