background image

2

2

MDC 1200 OPERATION

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16

 MDC 1200 system operation

The MDC 1200 signaling system enhances your transceiv-
er’s capabilities. It allows PTTID*, Emergency signaling, and 
receiving a Radio Check. Also, the dispatcher can stun and 
revive transceivers on the system.

An additional feature of the MDC 1200 system in Icom trans-
ceivers is called aliasing. Each transceiver on the system has 
a unique ID number. Aliasing allows substituting an alphanu-
meric name for the ID number. When transmitting, you can use 
this alias to select a transceiver to call. When a call is received, 
the alias of the calling station is displayed instead of the ID.

* When [PTT] is pushed or released, the transceiver transmits your 

station ID.

   NOTE: 

During MDC 1200 system operation, IDAS opera-

tion capability is disabled.

 Receiving a call

D

 

Receiving an Emergency Call

q

 When an emergency call is received:

  • Beeps sound.
  •  The calling station ID (or alias) and “EMG EMG” are alternately 

displayed.

w

  To stop the beep and display indication, turn OFF the 

power, change the channel or push [PTT].

D

 

Receiving a Stun and Revive

The dispatcher can send MDC 1200 system signals that 
will stun or revive your transceiver. If a Stun command that 
matches your station ID is received, the transceiver will dis-
play “SORRY” (default) and you cannot receive* or transmit. 
When a Revive command that matches your station ID is 
received, normal operation is restored and “SORRY” disap-
pears.
(* Except Revive command signals)

Содержание IC-F5120D Series





















Отзывы: