12
3
IDAS OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D
Transmitting a Status Message
The transceiver has the ability to send a preprogrammed sta-
tus message.
There are up to 100 status messages that can be sent.
q
Push [Digital Button] to enter the application selection
mode.
• “VOICE” appears.
• To change to the desired call type, hold down [Digital Button] for
1 second while in standby. After changing, the transceiver auto-
matically enters the application selection mode.
w
Push [CH Up] or [CH Down] to select “STATUS.”
e
Push [Digital Button] again to enter the status message
selection mode.
• A preprogrammed status message is displayed.
r
Push [CH Up] or [CH Down] to select the desired mes-
sage.
Preprogrammed status message is displayed.
t
Push [Digital Button] again to enter the Individual or Talk-
group ID selection mode.
• The preprogrammed ID name is displayed.
• When an ID name is not programmed, the ID code is displayed.
• The primary ID can be preset to display first.
y
Push [CH Up] or [CH Down] to select the desired ID name
(or ID code).
Individual or Talkgroup ID name is displayed.
u
Push [PTT] to transmit the status message.
• “STAT TX” is displayed.
i
Release [PTT].
• “STAT OK” is displayed after receiving an acknowledgement
from the base station.
• “STA FAIL” is displayed if there is no acknowledgment from the
base station.
o
After a specified time period has passed, the transceiver
will return to standby.