![background image](http://html1.mh-extra.com/html/icom/ic-f4sr/ic-f4sr_instruction-manual_612591013.webp)
9
4
SCAN OPERATION
■
Scan types
Scanning is an efficient way to locate signals quickly over all
channels.
Setting select channels and using select channel mode (p. 7)
speed up the scanning interval.
In addition, the auto channel function is available for standby
convenience. (p. 11)
■
Starting a scan
To speed up the scanning interval, set desired channels as
select channels and set select channel mode in advance. (p.
7)
q
Push [
f
(SCAN)] to start the scan.
• Decimal point flashes while scanning.
w
When receiving a signal, scan pauses and resumes ac-
cording to the included CTCSS frequency or DTCS tone.
(p. 12)
• When the code is matched, scan resumes 5 sec. after the signal
disappears.
• When the code is not matched, scan resumes immediately.
e
Push [
f
(SCAN)] to stop the scan.
Repeatedly scans all channels including non-select
channels in sequence.
Repeatedly scans select channels only, in sequence.
SCAN in all channel mode
SCAN in select channel mode
ch 24
ch 01
ch 02
ch 03
SKIP
SKIP
SKIP
ch 04
ch 05
ch 06
ch 23
ch 24
ch 01
ch 02
ch 04
ch 06
Flashes while scanning.