Icom IC-F4029SDR, Инструкция по эксплуатации

Страница: 17 / 48

14
5
RINGER FUNCTION
(Analog mode operation only)
4
5
■
Smart-Ring operation
The ring function has an answer back feature. This allows you
to confirm whether or not a call has reached to the member of
your group even if the operator is temporarily away from the
transceiver.
q
Set the same operating channel and CTCSS tone code for
all of your group transceivers.
w
Push (S-Ring/Ringer) to send the Smart-Ring call.
• “ ” and “ ” appears.
• When a member of your group station answers your call, the
transceiver emits beep tones for every 10 sec. and “ ” blinks.
• Push [Side1] (MONI) to cancel the Ringer beep and “ ” blinks.
• When no answer comes back, the transceiver emits short failure
beep tones.
e
Push [PTT] to answer the call and to stop the beeps and
blinking.
NOTE: This function is available only when the called
station has use the same CTCSS tone code and the
same operating channels as you.
(S-Ring/Ringer)
Piro Pir
o
Answer back (automatic)
Piro Pir
o
Communication
Push
Appears Appears
While transmitting
! IC-F4029SDR-3.qxd 06.7.4 5:53 PM Page 14 (1,1)