background image

 Setting the microphone gain

Adjusts the microphone gain.

q  

Rotate [VOL] to turn the trans-
ceiver power OFF.

w

  

Set [ROTARY SELECTOR] to 
any channel other than Chan-
nel 16.

e

 

 

While pushing and holding 
[Lower], rotate [VOL] to turn the 
power ON and enter the micro-
phone gain adjustment mode.

r

  

Push [Upper] to increase, or 
push [Lower] to decrease the 
microphone gain.

  •  The adjustable range is 1 (mini-

mum) to 4 (maximum).

  •  

A beep sounds after pushing 
[Upper] or [Lower].

     If the level is set on 1 or 4, an 

error beep sounds after push-
ing.

     Therefore, you can determine the current level setting by the type 

of beep that sounds.

t

  Rotate [VOL] to turn the power OFF, then ON to exit the micro-

phone gain adjustment mode.

NOTE:
•  This operation may not be available, depending on the preset-

ting. Ask your dealer for details.

•  When using the VOX function, we recommend setting the mi-

crophone gain to 3. However, you can adjust it to suit your op-
erating environment (including your headset performance).

18

3

BASIC OPERATION

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20

[VOL]

[Upper]
[Lower]

[ROTARY SELECTOR]

Содержание IC-F4002

















































Отзывы: