background image

40

6

OPTIONS

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20

D

 

Setting the VOX gain

The VOX sensitivity level can be adjusted from 1 (minimum) to 10 
(maximum).

q  

Connect the 

optional headset 

(HS-94, HS-95 or HS-97) 

and 

OPC-2004. (p. 38)

w  

Rotate [VOL] to t

urn the trans-

ceiver power OFF.

e

  Set [ROTARY SELECTOR] to 

Channel 16.

r

 

 

While pushing and holding 
[PTT] and [Upper], rotate [VOL] 
to turn the power ON and 
enter the VOX gain adjustment 
mode.

t

  

Push [Upper] to increase, or 
push [Lower] to decrease  the 
VOX gain while speaking into 
the optional headset.

  • The adjustable range is 1 (minimum) to 10 (maximum).
  • A beep sounds after pushing [Upper] or [Lower].
    If the level is set on 1 or 10, an error beep sounds after pushing.
     Therefore, you can determine the current level setting by the type 

of beep that sounds.

y

  Rotate [VOL] to turn the power OFF, then ON to exit the VOX 

gain adjustment mode.

NOTE:
•  This operation may not be available, depending on the preset-

ting. Ask your dealer for details.

• Set the microphone gain before setting the VOX gain. (p. 18)

[VOL]

[PTT]

[Upper]
[Lower]

[ROTARY SELECTOR]

Содержание IC-F4002

















































Отзывы: