4
SETTINGS
10
Setting the microphone gain
Higher levels make the microphone more sensitive to
the user’s voice.
Rotate
q
[VOL]
to turn OFF the power.
Set
w
[ROTARY SELECTOR]
to Channel 16.
While holding down
e
[Upper]
, rotate
[VOL]
to turn
ON the power and enter the microphone gain adjust-
ment mode.
Push
r
[Upper]
or to increase, or push
[Lower]
to de-
crease the microphone gain.
• The adjustable range is 1 (minimum) to 4 (maximum).
• A beep sounds after pushing
[Upper]
or
[Lower]
.
An error beep sounds if you try to exceed the adjustable
range.
NOTE:
The Beep function should be turned ON. (p. 5)
Rotate
t
[VOL]
to turn OFF the power to exit the mi-
crophone gain adjustment mode.
[ROTARY SELECTOR]
[VOL]
[Lower]
[Upper]