Icom IC-F110, Инструкция по эксплуатации

Страница: 3 / 24

ii
DO NOT
use or place the transceiver in areas with tem-
peratures below –25°C or above +55°C, or in areas subject to
direct sunlight, such as the dashboard.
AVOID
operating the transceiver without running the vehi-
cle’s engine. The vehicle’s battery will quickly run out if the
transceiver transmits while the vehicle’s engine OFF.
AVOID
placing the transceiver in excessively dusty envi-
ronments.
AVOID
placing the transceiver against walls. This will
obstruct heat dissipation.
AVOID
the use of chemical agents such as benzine or
alcohol when cleaning, as they damage the transceiver sur-
faces.
BE CAREFUL!
The transceiver will become hot when
operating continuously for long periods.
For U.S.A. only
CAUTION: Changes or modifications to this transceiver, not ex-
pressly approved by Icom Inc., could void your authority to operate
this transceiver under FCC regulations.
TABLE OF CONTENTS
IMPORTANT .................................................................................... i
EXPLICIT DEFINITIONS ................................................................. i
PRECAUTION .................................................................................. i
TABLE OF CONTENTS .................................................................. ii
1 PANEL DESCRIPTION ........................................................... 1–6
■
Front panel ............................................................................... 1
■
Function display ....................................................................... 2
■
Programmable function keys .................................................... 3
2 OPERATION .......................................................................... 7–10
■
Turning power ON .................................................................... 7
■
Channel selection ..................................................................... 7
■
Receiving and transmitting ....................................................... 8
D
Transmitting notes ................................................................. 8
D TX code channel selection .................................................... 9
D
TX code number selection .................................................... 9
D
DTMF transmission ............................................................... 9
D
Scrambler function ................................................................ 9
D User set mode ..................................................................... 10
3 OPTIONAL SmarTrunk II
TM
OPERATION .......................... 11–12
■
SmarTrunk II
TM
and conventional modes ............................... 11
■
SmarTrunk II
TM
operation ....................................................... 11
4 CONNECTION AND MAINTENANCE ................................ 13–17
■
Rear panel and connection .................................................... 13
■
Supplied Accessories ............................................................. 14
■
Mounting the transceiver......................................................... 15
■
Optional UT-105, UT-108 or UT-111 installation ..................... 15
■
Optional UT-109 or UT-110 installation .................................. 16
■
Optional OPC-617 installation................................................. 16
■
Antenna ................................................................................... 17
■
Fuse replacement .................................................................. 17
■
Cleaning ................................................................................. 17
5 OPTIONS ................................................................................... 18
6 CE ........................................................................................ 19–20
IC-F110_F210_EUR-1.qxd 03.2.5 3:30 PM Page ii (1,1)