Icom IC-E90 Скачать руководство пользователя страница 70

Страница: 70 / 100

SET MODE

• DTCS phase mode

(DTCS P)

Selects DTCS phase mode.

• Turn the expanded set mode 2 ON in advance.

• BOTH N Normal phases are used for

both Tx and Rx. (default)

• TN-RR

Normal phase is used for
Tx; Reverse phase for Rx.

• TR-RN

Reverse phase is used for
Tx; Normal phase for Rx.

• BOTH R Reverse phases are used

for both Tx and Rx.

• Busy lockout

(LK OUT)

Turns the busy lockout function ON and OFF. This function
inhibits transmission while receiving a signal or when the
squelch is open.

• Turn the expanded set mode 2 ON in advance.

• ON

The busy lockout is turned ON.

• OFF The busy lockout is turned

OFF. (default)

• Time-out timer

(TOT)

To prevent accidental prolonged transmission, etc., the trans-
ceiver has a time-out timer. This timer cuts a transmission
OFF after 1, 3, 5 or 10 min. of continuous transmission. This
timer can be cancelled.

• Turn the expanded set mode 2 ON in advance.

Approx. 10 sec. before the time-out timer is activated, the

transceiver emits a beep tone as a warning.

• OFF The time-out timer is turned

OFF. (default)

• 1–10 The transmission is cut OFF

after the set period elapses.

• Active band

(ACTIVE)

Allows continuous frequency selection of the operating fre-
quency across all bands.

• ALL

The operating frequency
can be selected continu-
ously. (default)

• SINGLE The operating frequency

can be selected within
the current band. Push
[BAND] for band selec-
tion in this case.

Содержание IC-E90





































































































Результаты поиска

Содержание IC-E90

Отзывы:

Похожие инструкции для IC-E90

Бренды по названию

Популярные бренды

Icom IC-E90, Инструкция по эксплуатации

Результаты поиска

Содержание IC-E90

Отзывы:

Похожие инструкции для IC-E90

Бренды по названию

Популярные бренды