Icom IC-E90 Скачать руководство пользователя страница 19

Страница: 19 / 100

BATTERY CHARGING

■

Regular charging

Prior to using the transceiver for the first time, the battery
pack must be fully charged for optimum life and operation.

CAUTION:

To avoid damage to the transceiver, turn the
transceiver OFF while charging.

• Recommended temperature range for charging:

0°C to +35°C; +32°F to +95°F

• Use the wall charger* (BC-110AR/DR) only.

NEVER

use an-

other manufactures’ charger.

* Not supplied with some versions.

• An optional cable CP-19R (for 12 V cigarette lighter socket)

can be used instead of the AC adapters of the above charg-
ers.

Battery indicators

The battery indicators blink while charging but do not indicate
the power condition.

“CHG_F” appears when the charging is completed. Discon-
nect the wall charger in this case.

Attach the battery pack to the transceiver.

Be sure to turn the transceiver power OFF.

Connect the AC adapter* (BC-110D/DR) as shown below.

* Not supplied with some versions.

Remove any cables from the [DC11V] jack.

• Charging period:

15 hours (w/BP-217)

TTER

CHARGING

IC-E90

with BP-217

BC-110D/DR

to AC outlet

to DC power
jack

to a 12 V
cigarette lighter
socket

CP-19R

(optional)

Содержание IC-E90





































































































Результаты поиска

Содержание IC-E90

Отзывы:

Бренды по названию

Популярные бренды

Icom IC-E90, Инструкция по эксплуатации

Результаты поиска

Содержание IC-E90

Отзывы:

Бренды по названию

Популярные бренды