Icom IC-A25C Скачать руководство пользователя

Страница: 38 / 53

Bluetooth

OPERATION

10-2

Operating Bluetooth

The IC-A25N and IC-A25NE have a built-in Bluetooth

unit. You can connect Bluetooth headsets, or other

Bluetooth devices to use some of navigation functions.

The communication range of Bluetooth is

approximately 10 meters (33 ft).

Bluetooth

Electromagnetic Interference

When you use a Bluetooth device, pay attention to the

following:

Bluetooth devices operate in the 2.4 GHz band. The

2.4 GHz band is also used by other devices, such

as Wireless LAN products, microwave ovens, RFID

systems, amateur radio stations, and so on.

When using this device near such devices,

interference may occur, causing a decrease in

communication speed, and an unstable connection.

In such cases, use this device away from the other

devices, or stop using those devices.

IC-A25N or

IC-A25NE

Bluetooth headset

(Example: Optional VS-3

NOTE:

• The Bluetooth communication range may vary,

depending on the environment where you operate

the device.

• The key beep sound may distorts when using the

transceiver with a Bluetooth headset. Reduce the

key beep level to prevent the distortion.

([MENU] > Sounds Settings >

Beep

)

• You cannot switch the optional VS-3 Bluetooth

headset to other devices, if the VOX level is set to 6.

([MENU] > Radio Settings >

VOX Level

)

Pairing with a device

You can pair Bluetooth headsets and data devices to

the transceiver, as shown below:

•A maximum of 5 Bluetooth headsets and data

devices.

•A maximum of 2 Low Energy (LE) devices.

These instructions describe pairing with the VS-3

Bluetooth

headset, as an example.

1. Turning ON the transceiver’s Bluetooth function

1. Push [MENU].

2. Select “Bluetooth Set,” and then push [ENT].

(Bluetooth > Settings >

Bluetooth Set

)

3. Select “ON,” and then push [ENT].

4. Push [MENU] to return to the Main screen.

2. Entering the VS-3 Pairing mode

Refer to the VS-3’s instruction manual for details.

3. Pairing and connecting the Bluetooth headset

1. Push [MENU].

2. Select “Search Device,” and then push [ENT].

(Bluetooth > Pairing/Connect >

Search Device

)

The transceiver cannot search for a new headset or

device if it is connected with more than 2 headsets or

devices.

3. Select “Headset.”

•The transceiver searches for a headset.

Push [CLR] to cancel searching.

4. Select the headset to pair, and then push [ENT].

“No Device Found” is displayed if no headsets or

devices are found.

A passkey or PIN code may be required to pair,

depending on the headset or device. Refer to your

headset or device’s instructions for details.

The headset or device name changes to its Bluetooth

device address in 5 seconds.

5. Push [MENU] to return to the Main screen.

• “ ” is displayed if the headset or device is correctly

connected.

Содержание IC-A25C






















































Результаты поиска

Содержание IC-A25C

Отзывы:

Похожие инструкции для IC-A25C

Бренды по названию

Популярные бренды

Icom IC-A25C, Руководство пользователя

Результаты поиска

Содержание IC-A25C

Отзывы:

Похожие инструкции для IC-A25C

Бренды по названию

Популярные бренды