Icom IC-92AD, Инструкция по эксплуатации

Страница: 98 / 156

90
New New2001
PRIORITY WATCH
11
■
Priority watch types
Priority watch checks for signals on the frequency every
5 sec. while operating on a VFO frequency or scanning. The
transceiver has 3 priority watch types to suit your needs.
The watch resumes according to the selected scan resume
condition. See page 89 for details.
NOTE: If the pocket beep function is activated, the trans-
ceiver automatically selects the tone squelch function
when priority watch starts.
D
About priority beep function
When receiving a signal on the priority frequency, you can
be alerted with beeps and a blink “
S
.” This function can
be activated when setting the priority watch function ON.
MEMORY/CALL CHANNEL WATCH
While operating on a VFO fre-
quency, priority watch checks
for a signal on the selected
channel every 5 sec.
• A memory channel with skip infor-
mation can be watched.
MEMORY SCAN WATCH
While operating on a VFO fre-
quency, priority watch checks
for signals on each memor y
channel in sequence.
• The memory skip function and/or
memory bank scan is useful to
speed up the scan.
VFO SCAN WATCH
While scanning in VFO mode,
priority watch checks for signals
on the selected channel every
5 sec.
5 sec.
VFO
frequency
Memory
(Call)
channel
5 sec.
VFO
frequency
SKIP
Mch 000
Mch 001
Mch 001
Mch 999
5 sec.
VFO
scan
Memory
(Call)
channel