Icom IC-92AD, Инструкция по эксплуатации

Страница: 92 / 156

New
84
10
SCAN OPERATION
New2001
■
Scan edges programming
Scan edges can be programmed in the same manner as
memory channels. Scan edges are programmed into scan
edges, 00A/00B to 24A/24B, in memory channels.
q
Push [VFO] to select VFO mode.
w
Set the desired frequency:
➥
Select the desired band with [BAND] .
➥
Set the desired frequency with [DIAL] .
➥
Program different frequencies in “
✱✱
A” and “
✱✱
B” re-
spectively.
➥
Set other data
(e.g. offset frequency, duplex direction, tone
squelch, etc.)
, if desired.
e
Push and hold [S.MW](MR) for 1 sec. to enter the select
memory write mode.
• 1 short and 1 long beeps sound.
• Memory channel number blinks.
r
Rotate [DIAL] to select the desired programmed scan
edge channel from 00A to 24A.
t
Push and hold [S.MW](MR) for 1 sec.
• 3 beeps sound
.
• The other scan edge channel “B,” 00B to 24B, is automatically
selected when continuing to push [S.MW](MR) after program-
ming.
y
To program a frequency for the other pair of scan edges,
00B to 24B, repeat steps
w
and
r
.
• If the same frequency is programmed into a pair of scan edges,
programmed scan will not function.
[EXAMPLE]: Programming 145.300 MHz into scan edges 03A.
[DIAL]
VFO
MHz
A
MR
S.MW
B
BAND
D
A A
FM FM
14 145 300 300
PSKI PSKIP
A
FM FM
14 145 300 300
PSKI PSKIP
03A 03A
A
FM FM
14 145 300 300
PSKI PSKIP
14 146 010 010
BANK BANK :---- :----
MNAME: MNAME:
SKIP SKIP :OFF :OFF
FM FM
r
µ 001 001
BANK BANK :---- :----
MNAME: MNAME:
SNAME: SNAME:
FM FM
r
µ 03A 03A
Push and hold for 1 sec.
Rotate [DIAL].
Push and hold for 1 sec.
MR
S.MW
B
MR
S.MW
B