Icom IC-92AD, Инструкция по эксплуатации

Страница: 94 / 156

New
86
10
SCAN OPERATION
New2001
■
Memory bank scan
IMPORTANT!: To perform memory bank scan, 2 or more
bank channels MUST be programmed, otherwise the
scan will not start.
q
Push [S.MW](MR) several times to select memory bank
mode.
w
Set the squelch level.
e
While pushing and holding [SCAN](2) , rotate [DIAL] to
select the desired scanning type.
• “ALL” for all bank scan; “BANK-LINK” for bank link scan or
“BANK-x” for bank scan (x= A to Z; programmed bank groups
are only displayed.), “DUP” (appears only when duplex opera-
tion is set) for duplex scan.
r
Release [SCAN](2) to start the selected scan.
• Scan pauses when a signal is received.
• Rotate
[DIAL] to change the scanning direction, or resumes
manually.
t
To stop the scan, push [VFO] .
The bank-link setting can be changed in scan set mode.
See page 109 for details.
Duplex scan function: Repeatedly scans two frequen-
cies (transmission/reception) during duplex scan opera-
tion.
Memory bank scan skips any memory channels in the se-
lected bank that are set to “SKIP” or “PSKIP”.
Memory bank scan stops at the first channel when all
channels in a bank are set to “SKIP” or “PSKIP”.
FM FM
A
14 146 010 010
µ A01 A01
SCAN:ALL SCAN:ALL FM
A
14 148 800 800
µ A01 A01
SCAN:BANK-LINK SCAN:BANK-LINK
FM
A
14 148 800 800
µ A01 A01
SCAN:BANK-A SCAN:BANK-A
PSKI PSKIP
PSKI PSKIP
FM
A
14 148 800 800
µ A01 A01
SCAN:DUP SCAN:DUP
PSKI PSKIP
PSKI PSKIP
• All bank scan selection
• Bank scan selection
• Bank link scan selection
• Duplex scan selection
Selectable between “A” to “Z” if programmed.
[DIAL]
VFO
MHz
A
MR
S.MW
B
2
SCAN
FM
A
µ 888
148 800
• During all bank/bank link scan • During bank scan
FM
A
µ A88
148 800