17
■
[VOL] function assignment
[VOL]
can be used as a channel selector instead of
[
S
]
and
[
T
]
, to suit your preference. However, when
[VOL]
functions as
a channel selector,
[
S
]
and
[
T
]
function as volume controls.
q
While holding down
[
S
]
and
[
T
]
, turn ON the power to
enter the Initial Set mode.
w
Push
[
S
]
or
[
T
]
to select the dial assignment item. (tOP)
e
Rotate
[VOL]
to select an option.
r
Push
[# ENT](MN.W)
to exit the Initial Set mode.
[VOL]
and
[
S
]
/
[
T
]
function as described below, depend-
ing on the option.
[VOL]
[VOL]
functions as the volume control.
[VOL]
functions as the channel selector.
4
BASIC OPERATION
Option
[VOL]
[
S
]
/
[
T
]
tOP.VO
Volume control
Channel selector
tOP.di
Channel selector
Volume control
■
Lockout function
The Lockout function helps prevent interference to other sta-
tions by inhibiting transmitting when the channel is busy.
The function is set in the Initial Set mode.
q
While holding down
[
S
]
and
[
T
]
, turn ON the power to
enter the Initial Set mode.
w
Push
[
S
]
or
[
T
]
to select the lockout item. (RLO)
e
Rotate
[VOL]
to select an option of the Lockout function.
• “RLO.OF” : Allows transmitting, even if the channel is busy.
•
“RLO.RP”
:
Inhibits transmitting when the channel is busy, ex-
cept while receiving a signal that includes a match-
ing subaudible tone.
• “RLO.bU” : Inhibits transmitting when the channel is busy.
r
Push
[# ENT](MN.W)
to exit the Initial Set mode.
The
RP
Lockout function is ON.
[VOL]