19-4
19
SPECIFICATIONS AND OPTIONS
■
Options
Approved Icom optional equipment is designed for optimal
performance when used with an Icom transceiver.
Icom is not responsible for the destruction or damage to an
Icom transceiver in the event the Icom transceiver is used
with equipment that is not manufactured or approved by
Icom.
IC-PW1/EURO
hf
/50
mh
z
all
band
1 k
w
linear
amplifier
Full-duty-cycle 1 kW linear amplifier including an automatic
antenna tuner. Has automatic tuning and band selection ca-
pability when used with an Icom transceiver. Full break-in
(QSK) operation. The amplifier/power supply unit and the
remote control unit are separate.
SP-34
external
speaker
4 audio filters, headphone jack, can be connected to 2 trans-
ceivers.
• Input impedance: 8
Ω
• Max. input power: 5 W
SM-50
desktop
microphone
Unidirectional, dynamic micro-
phone for base station operation.
Includes [UP]/[DOWN] switches, a
low cut switch and mic gain con-
trol.
CT-17
ci
-
v
level
converter
For remote transceiver control
using a PC. You can change fre-
quencies, operating mode, mem-
ory channels, etc. (software is not
included)
HM-36
hand
microphone
Hand microphone equipped with
[UP]/[DOWN] switches.
SP-33
external
speaker
Designed for base station operation.
• Input impedance:
8
Ω
• Maximum input power: 5 W
RS-BA1
ip
remote
control
software
To remotely control radios using the RS-BA1, BE SURE
that you comply with your local regulations.
SM-30
desktop
microphone
Unidirectional, electret microphone
for base station operation. Includes
a low cut switch and mic gain con-
trol.