11-2
11
MEMORY OPERATION
MEMORY
MEMORY
TRANSFER
OVER-
CHANNEL
CHANNEL
CAPABILITY
TO VFO
WRITING
CLEAR
NUMBER
Regular memory
1–99
One frequency and one mode
Yes
Yes
Yes
channels
in each memory channel.
Scan Edge
One frequency and one mode in
memory
P1, P2
each memory channel as scan
Yes
Yes
No
channels
edges for programmed scans.
■
Memory channels
The transceiver has 101 memory channels. The Mem-
ory mode is very useful for quickly selecting often-used
frequencies.
All 101 memory channels are tunable, which means
the entered frequency can be temporarily tuned by ro-
tating [MAIN DIAL].
■
Memory channel selection
D
Using the M-CH
[
p
] or [
q
]
keys
Push [V/M] to select the Memory mode.
q
Push M-CH
w
[
p
] or [
q
]
several times to select the
desired memory channel.
• Hold down M-CH [
p
] or [
q
] to continuously change the
memory channels.
• You can also push [UP] and [DN] on microphone keys.
To return to the VFO mode, push [V/M] again.
e
D
Using the keypad
Push [V/M] to select the Memory mode.
q
Push [F-INP].
w
Push the keypad keys to enter the desired memory
e
channel number.
• Enter 100 or 101 to select Scan Edge channels P1 or
P2.
Push M-CH
r
[
p
] or [
q
]
to switch to the entered mem-
ory channel.
[EXAMPLE]
To select memory channel 3:
- Push [F-INP•
ent
], [3], then push M-CH
[
p
] or [
q
]
.
To select memory channel 12:
- Push [F-INP•
ent
], [1], [2], then push M-CH
[
p
] or
[
q
]
To select Scan Edge channel P1:
- Push [F-INP•
ent
], [1], [0], [0], then push M-CH
[
p
]
or [
q
]
.
To select Scan Edge channel P2:
- Push [F-INP•
ent
], [1], [0], [1], then push M-CH
[
p
]
or [
q
]
.
[SUB]
[V/M]
[MAIN]
M-CH [
�
] or [
�
]
F-INP
ENT
PUSH
• Memory mode
M-CH number
VFO frequency
M-CH frequency