18-6
D
Command table (continued)
18
CONTROL COMMAND
Cmd. Sub Cmd. Data
Description
1A
05 0079
00 to 08
Send/read frequency readout font
( 00=Basic (1), 01=Basic (2), 02=Basic (3),
03=Italic (1), 04=Italic (2), 05=Italic (3),
06=Round (1), 07=Round (2),
08=Round (3))
0080
00 to 02
Send/Read response speed for Standard
and Edgewise meter needle
(00=Slow, 01=Mid, 02=Fast)
0081
00 to 02
Send/read meter type
(00=Standard, 01=Edgewise, 02=Bar)
0082
00 or 01
Send/read meter type during expanded
screen (00=Edgewise, 01=Bar)
0083
00 or 01
Send/read peak hold set for Bar meter
(00=OFF, 01=ON)
0084
00 or 01
Send/read memory name indication setting
(00=OFF, 01=ON)
0085
00 or 01
Send/read audio peak filter width popup
indication setting (00=OFF, 01=ON)
0086
00 or 01
Send/read manual notch width pop-up
indication setting (00=OFF, 01=ON)
0087
00 to 03
Send/read screen saver function
( 00=OFF, 01=15 minutes, 02=30 minutes,
03=60 minutes)
0088
00 to 03
Send/read screen saver type
( 00=Bounce, 01=Rotation, 02=Twist,
03=Sleep)
0089
00 or 01
Send/read output signal setting for external
display (00=OFF, 01=ON)
0090
00 or 01
Send/read flame rate shift setting for external
display (00=OFF, 01=ON)
0091
00 or 01
Send/read image resolution for external
display (00=800x480, 01=800x600)
0092
00 or 01
Send/read synchronous pulse level setting
(00=L, 01=H)
0093
00 or 01
Send/read opening message indication
(00=OFF, 01=ON)
0094
see
p. 18-11
Send/read opening message contents
(up to 10-character)
0095
20000101 to
20991231
Send/read date
( 20000101=1st Jan. 2000 to
20991231=31st Dec. 2099)
0096
0000 to
2359
Send/read time (0000=00:00 to 2359=23:59)
0097
00 or 01
Send/read NTP (Network Time Protocol)
function setting (00=OFF, 01=ON)
0098
see
p. 18-11
Send/read NTP server address setting
0099
see
p. 18-10
Send/read UTC offset time
0100
00 or 01
Send/read CLOCK2 function
(00=OFF, 01=ON)
0101
see
p. 18-11
Send/read UTC offset time for CLOCK2
0102
see
p. 18-11
Send/read CLOCK2 name
(up to 3-character)
0103
00 or 01
Send/read calibration marker
(00=OFF, 01=ON)
0104
00 or 01
Send/read confirmation beep
(00=OFF, 01=ON)
0105
00
Send/read the band edge beep OFF
01
Send/read the band edge beep ON (Beep
sounds with a default amateur band)
02
Send/read the band edge beep with user
setting ON
03
Send/read the band edge beep with user
setting/TX limit ON
0106
0050 to
0200
Send/read
the Main band’s
beep audio
frequency (0050=500 Hz to 0200=2000 Hz)
0107
0050 to
0200
Send/read
the Sub band’s
beep audio
frequency
(0050=500 Hz to 0200=2000 Hz)
0108
00 or 01
Send/read TX output power limit function
(00=OFF, 01=ON)
0109
00 to 05
Send/read the TX Delay setting (HF)
( 00=OFF, 01=10 ms, 02=15 ms, 03=20 ms,
04=25 ms, 05=30 ms)
Cmd. Sub Cmd. Data
Description
1A*
05 0110
00 to 05
Send/read the TX Delay setting (50 MHz)
( 00=OFF, 01=10 ms, 02=15 ms, 03=20 ms,
04=25 ms, 05=30 ms)
0111
00 to 05
Send/read TOT setting for remote or the
[TRANSMIT] key operation
( 00=OFF, 01=3 minutes, 02=5 minutes,
03=10 minutes, 04=20 minutes,
05=30 minutes)
0112
00 or 01
Send/read quick dualwatch function
(00=OFF, 01=ON)
0113
00 or 01
Send/read quick split set (00=OFF, 01=ON)
0114
see
p. 18-11
Send/read FM split offset –9.999 to
+9.999 MHz for HF
0115
see
p. 18-11
Send/read FM split offset –9.999 to
+9.999 MHz for 50 MHz
0116
00 or 01
Send/read split lock set (00=OFF, 01=ON)
0117
00 or 01
Send/read tuner auto start set
(00=OFF, 01=ON)
0118
00 or 01
Send/read PTT tune set (00=OFF, 01=ON)
0119
00 or 01
Send/read transverter set (00=OFF, 01=ON)
0120
see
p. 18-11
Send/read transverter offset
0121
00 to 02
Send/read RTTY mark frequency
(00=1275 Hz, 01=1615 Hz, 02=2125 Hz)
0122
00 to 02
Send/read RTTY shift width
(00=170 Hz, 01=200 Hz, 02=425 Hz)
0123
00 or 01
Send/read RTTY keying polarity
(00=Normal, 01=Reverse)
0124
00 to 02
Send/read PSK tone frequency
(00=1000 Hz, 01=1500 Hz, 02=2000 Hz)
0125
00 or 01
Send/read speech language
(00=English, 01=Japanese)
0126
00 or 01
Send/read speech speed (00=Low, 01=High)
0127
00 or 01
Send/read S-level speech (00=OFF, 01=ON)
0128
00 or 01
Send/read speech with a mode switch
operation (00=OFF, 01=ON)
0129
00 or 01
Send/read memo pad numbers
(00=5 ch, 01=10 ch)
0130
00 or 01
Send/read
[MAIN DIAL]
function
(00=MAIN, 01=MAIN+SUB)
0131
00 to 02
Send/read
[MAIN DIAL]
auto TS
(00=OFF, 01=Low, 02=High)
0132
00 to 02
Send/read
[SUB DIAL]
auto TS
(00=OFF, 01=Low, 02=High)
0133
00 or 01
Send/read mic. up/down speed
(00=Low, 01=High)
0134
00 or 01
Send/read quick RIT/
∂
TX clear function
(00=OFF, 01=ON)
0135
00 to 02
Send/read SSB notch operation
(00=Auto, 01=Manual, 02=Auto/Manual)
0136
00 to 02
Send/read AM notch operation
(00=Auto, 01=Manual, 02=Auto/Manual)
0137
00 or 01
Send/read DIGI-SEL control function
(00=DIGI-SEL, 01=APF)
0138
00 or 01
Send/read band indication for Filter screen
(00=Fix, 01=Auto)
0139
00 or 01
Send/read SSB/CW synchronous tuning
function (00=OFF, 01=ON)
0140
00 or 01
Send/read CW normal side set
(00=LSB, 01=USB)
0141
00 or 01
Set/read APF type (00=SHARP, 01=SOFT)
0142
00 or 01
Send/read band setting for audio output from
mic. connector (00=MAIN+SUB, 01=SUB)
0143
00 or 01
Send/read bias voltage output for mic. audio
input ([MIC]; pin 1) (00=OFF, 01=ON)
0144
00 or 01
Send/read external keypad set for RTTY
memory (00=OFF, 01=ON)
0145
00 or 01
Send/read external keypad set for PSK
memory (00=OFF, 01=ON)
0146
00 or 01
Send/read the voice memory transmission
set for [F1] to [F8] on the keyboard
(00=OFF, 01=ON)
0147
00 or 01
Send/read the memory keyer transmission
set for [F1] to [F8] on the keyboard
(00=OFF, 01=ON)