12-15
12
SET MODE
SPEECH S-Level
ON
The IC-7700 speech processor can announce
frequency, mode and signal level. Signal level an-
nouncement can be deactivated if desired.
(default: ON)
When “OFF” is selected, the signal level is not an-
nounced.
SPEECH [MODE] Switch
OFF
Selects the operating mode speech capability when
a mode switch is pushed; ON or OFF. (default: OFF)
When “ON” is selected, the selected operating mode
is announced when a mode switch is pushed.
Memopad Numbers
5
Sets the number of memo pad channels available. 5
or 10 memo pads can be selected. (default: 5)
MAIN DIAL Auto TS
HIGH
Sets the auto tuning step function for the main dial.
When rotating the main dial rapidly, the tuning step
automatically changes several times as selected.
There are 2 type of auto tuning steps: HIGH (Fast-
est) and LOW (Faster). (default: HIGH)
• HIGH : Auto tuning step is turned ON. Fastest
tuning step during rapid rotation. (default)
• LOW : Auto tuning step is turned ON. Faster tun
-
ing step during rapid rotation.
• OFF : Auto tuning step is turned OFF.
MIC Up/Down Speed
HIGH
Sets the rate at which frequencies are scanned
when the microphone [UP]/[DN] switches are held
down. HIGH or LOW can be selected.
• HIGH : High speed (default: 50 tuning steps/sec
-
ond)
• LOW : Low speed (25 tuning steps/second)
Quick RIT/
∂
TX Clear
OFF
Selects the RIT/
∂
TX frequency clearing instruction
with the
CLEAR
switch.
• ON : Clears the RIT/
∂
TX frequency when
CLEAR
is pushed momentarily.
• OFF : Clears the RIT/
∂
TX frequency when
CLEAR
is held down for 1 second. (default)
[NOTCH] Switch (SSB)
Auto/Manual
Selects notch functions for SSB mode operation
from Auto, Manual and Auto/Manual.
• Auto
: Only the auto notch can be used.
• Manual
: Only the manual notch can be used.
• Auto/Manual : Both the auto and manual notch can
be used. (default)
[NOTCH] Switch (AM)
Auto/Manual
Selects notch functions for AM mode operation from
Auto, Manual and Auto/Manual.
• Auto
: Only the auto notch can be used.
• Manual
: Only the manual notch can be used.
• Auto/Manual : Both the auto and manual notch can
be used. (default)
DIGI–SEL VR Operation
DIGI–SEL
Selects [DIGI-SEL] control function from DIGI-SEL
and APF.
• DIGI-SEL : [DIGI-SEL] control functions as the dig
-
ital selector operation. (default)
• APF
: [DIGI-SEL] control functions as the
audio peak filter adjustment.
■
Other set mode
(continued)
Содержание IC-7700
