Icom IC-7700, Инструкция по эксплуатации

Страница: 125 / 232

7-7
7
VOICE RECORDER FUNCTIONS
■
Playing back the recorded audio (Short REC)
D Basic playing
F-3
PLAY
F-1
�
F-2
�
q
Push
EXIT/SET
several times to close a multi-
function screen, if necessary.
w
Push [VOICE]
F-2
to display the Voice recorder
menu.
e
Push [PLAY]
F-1
to display the Voice recorder
screen.
• Previously selected screen, TX or RX memory, is dis -
played. If the TX memory message (T1–T4) appears,
push [T/R]
F-7
to select RX memory message.
r
Push [ Y ]
F-1
or [ Z ]
F-2
to select the desired
voice memory to playback.
Appears
Appears
Counts down
t
Push [PLAY]
F-3
to start playback.
• “
≈ PLAY
” indicators appear and the timer counts down.
y
Push [PLAY]
F-3
again to stop playback if de-
sired.
• Playback is terminated automatically when all of the re -
corded contents in the message are played.
u
Push
EXIT/SET
twice to exit the voice recorder
screen.
■
Recording a received audio (Short REC)
Up to 20 channels of receive voice memories are
available in the IC-7700. And the total audio length
of up to 209 seconds can be recorded in receive
channels. However, the maximum recordable length
into a single memory is 30 seconds.
This Voice Recorder does not record only the received
audio, but also the information such as set operating
frequency, mode, and the recording time for your fu-
ture reference.
D One-touch recording
REC
➥
Push
REC
momentarily to records the previous 15
seconds audio.
• The recordable time period can be set in voice set mode.
(p. 7-13)
• The operating frequency, mode and current time are au -
tomatically programmed as the memory names.
NOTE: When transmit (or [PTT] is pushed) within
the set period, no audio will be recorded.
IMPORTANT!
When you record the 21st audio segment, or when
the total audio length exceeds 209 seconds, the old -
est recorded audio is automatically erased to make
room for the new audio.