Icom IC-7000 Скачать руководство пользователя страница 82

Страница: 82 / 166

FUNCTIONS FOR RECEIVE

Center mode

Displays signals around the displayed frequency
within the selected span. The set frequency is always
displayed at the center of the screen.

Set a mode and frequency.

Select

G-1

(Scope).

Push

[F-3

FIX

]

momentarily to select the center

mode.

• “

” appears when the center mode is selected.

Push

[F-4

SPD

]

momentarily to select the sweep

speed.

• “

≈

” or “

≈≈

” appears when Slow speed or Fast speed is

selected, respectively.

Push

[F-1

SPN

]

one or more times to select the

desired steps.

• ±10, 25, 50, 100 and 250 kHz are available.
• Push and hold

[F-1

SPN

]

for 1 sec. to select the ±10

kHz step.

• The simple band scope operates in the peak level hold

mode. Peak levels are displayed in the background of
the current spectrum in a different color until the receive
frequency changes. This can be cleared by pushing
and holding

[F-2

HLD

]

for 1 sec., or deactivated in the

scope set mode. (below)

Push

[F-2

HLD

]

to freeze the current spectrum dis-

play and range.

• “

” and readout frequency indicator appear while the

function is in use.

NOTE:

If there is a lot of signal noise, turn the pre-

amp OFF and the attenuator ON (p. 74) to reduce
the input level and improve the readability of the
scope.

[MENU/GRP]

[F-1]

[F-2] [F-3] [F-4]

• Push and hold

[MENU/GRP]

for 1 sec. once or twice

to select the menu group

(Graphic).

• Push

[MENU/GRP]

momentarily one or more times to

select the menu

G-1

(Scope).

Scope set mode

This set mode is used to set the peak hold function
and scope size setting.

Select

G-1

(Scope).

Push and hold

[F-4

SPD

]

for 1 sec. to enter the

scope set mode.

Push

[F-1

≤

]

[F-2

≥

]

to select the desired set

item.

Set the desired condition using

[DIAL]

• Push

[F-4

DEF

]

for 1 sec. to select a default condition.

Push

[

(

MENU

GRP

)]

to exit from set mode.

[MENU/GRP] [F-1] [F-2] [F-4]

[DIAL]

• Push and hold

[MENU/GRP]

for 1 sec. once or twice

to select the menu group

(Graphic).

• Push

[MENU/GRP]

momentarily one or more times to

select the menu

G-1

(Scope).

Содержание IC-7000







































































































































































Результаты поиска

Содержание IC-7000

Отзывы:

Icom IC-7000, Инструкция по эксплуатации, Страница: 82 / 166

Результаты поиска

Содержание IC-7000

Отзывы: