Icom IC-7000, Инструкция по эксплуатации, Страница: 115 / 166

106
8
MEMORY OPERATION
8
Select memory channels are used for select memory
scan. Select memory scan repeatedly scans the se-
lect memory channels only. This is useful to speed up
the memory scan interval. Of course, select memory
channels are also scanned during normal memory
scan.
q
Select the memory channel list as described at left.
w
Push
[PBT/M-ch/RIT]
momentarily to select the M-
ch/RIT function, if the twin PBT is selected.
•
[PBT/M-ch/RIT]
indicator (Green) goes out.
e
Rotate
[M-ch]
(inner) control to select the desired
memory channel.
• All memory channels including blank channels can be
selected.
•
[
Y
]
/
[
Z
]
on the microphone also changes the channels.
r
Push
[F-1
SEL
]
to set the memory channel as a
select memory or not.
t
Repeat steps
e
to
r
to program another memory
channel as a select memory channel, if desired.
y
Push
[
Z
(
MENU
/
GRP
)]
twice to exit the memory
channel list.
Setting select memory channels is also possible in
the memory scan indication. (p. 115)
“
ß
” appears for select memory channel.
Push [F-1
SEL
]
[MENU/GRP] [F-1]
[PBT/M-ch/RIT] indicator
[PBT/M-ch/RIT] switch/[M-ch] (inner) control
D Setting a memory channel as a select memory
The IC-7000 has a total of 5 memory banks (99 mem-
ory channel each), A to E, are available for usage by
group, etc.
q
Select the memory channel as described at p. 102.
w
Push
[PBT/M-ch/RIT]
momentarily to select the M-
ch/RIT function, if the twin PBT is selected.
•
[PBT/M-ch/RIT]
indicator (Green) goes out.
e
Rotate
[RIT]
(outer) control to select the desired
memory bank.
• Memory channel list indication
q
Select the memory channel list as described at left.
w
Push
[F-4
BNK
]
several times to select the desired
memory bank.
• Rotating
[RIT]
(outer) control also changes the bank.
e
Push
[
Z
(
MENU
/
GRP
)]
twice to exit the memory
channel list.
Push
Bank indication
BNK
[F-4]
[MENU/GRP]
[RIT] (outer) control
Bank indication
D Selecting a memory bank