Icom IC-7000 Скачать руководство пользователя страница 81 | Manualshive

Страница: 81 / 166

Icom IC-7000 Скачать руководство пользователя страница 81

5

72

FUNCTIONS FOR RECEIVE

■

Simple band scope

This DSP-based simple band scope allows you to dis-
play conditions on the selected band, as well as rela-
tive strength of signals. The IC-7000 has two modes
for the spectrum indication—one is ﬁx mode, and an-
other one is center mode.

➥

Select

G-1

(Scope).

NOTE:

The IC-7000’s simple band scope can mon-

itor the displayed frequency during sweeping. Both
of the receving and sweeping functions use the
same receive circuit which switch alternatively es-
pecially at high speed. Thus this switching sound
during may be irritating to listen to. If so, set the de-
sired monitoring sound, “

FAST Sweep Sound

,”

or change the fast sweep setting, “

FAST

Sweep

,” in the scope set mode (p. 73).

[MENU/GRP]

• Push and hold

[MENU/GRP]

for 1 sec. once or twice

to select the menu group

G

(Graphic).

• Push

[MENU/GRP]

momentarily one or more times to

select the menu

G-1

(Scope).

D

Fix mode

Displays signals within the speciﬁed frequency range.
The selected band conditions can be observed at a
glance when using this mode.

NOTE:

If there is a lot of signal noise, turn the pre-

amp OFF and the attenuator ON (p. 74) to reduce
the input level and improve the readability of the
scope.

q

Set a mode and frequency.

w

Select

G-1

(Scope).

e

Push

[F-3

FIX

]

momentarily to select the fix

mode.

• “

O

” and readout frequency indicator appear when the

ﬁx mode is selected.

r

Push

[F-4

SPD

]

momentarily to select the sweep

speed.

• “

≈

” or “

≈≈

” appears when Slow speed or Fast speed is

selected, respectively.

t

Push

[F-1

SPN

]

one or more times to select the

desired steps.

• ±10, 25, 50, 100 and 250 kHz are available.
• Push and hold

[F-1

SPN

]

for 1 sec. to select the ±10

kHz step.

• “

<

” or “

>

” indicates when the displayed frequency is out

of range. The scope center position can be set to the
displayed frequency by pushing and holding

[F-3

FIX

]

for 1 sec.

• The simple band scope operates in the peak level hold

mode. Peak levels are displayed in the background of
the current spectrum in a different color until the receive
frequency changes. This can be cleared by pushing
and holding

[F-2

HLD

]

for 1 sec., or deactivated in the

scope set mode. (p. 73)

y

Push

[F-2

HLD

]

to freeze the current spectrum dis-

play.

• “

H

” appears while the function is in use.

• Push and hold

[MENU/GRP]

for 1 sec. once or twice

to select the menu group

G

(Graphic).

• Push

[MENU/GRP]

momentarily one or more times to

select the menu

G-1

(Scope).

[MENU/GRP]

[F-1]

[F-2] [F-3] [F-4]

Quick entry

➥

Push

[

Y

(

BAND

)]

for 1 sec. to turn the simple

band scope ON and OFF.

• Push

[

Z

(

MENU

/

GRP

)]

also to turn OFF.

[

Y

]

4
5

«
...
79
80
81
82
83
...
»

Содержание IC-7000







































































































































































Отзывы:

Нет отзывов