Icom IC-446S, Инструкция по эксплуатации

Страница: 19 / 32

14
RING FUNCTION
7
‘ ‘
Smart-Ring
The ring function has an answer back feature. This allows you to
confirm whether or not a call has reached the receiving party even
if the operator is temporarily away from the transceiver.
q
Set the same group channel number for
all of your group transceivers. (See left.)
w
While pushing [PTT], push [UP]/[
Y
] .
• A beep is emitted and “ ” blinks on
the display.
e
Release the [PTT].
• When a member of your group an-
swers your call, the transceiver emits
beep tones for 10 sec. and blinks “
”.
• When no answer comes back, the
transceiver emits short faint beep tones.
r
Push [PTT] to answer and to stop the beeps and flashing.
NOTE: This function is available only when the called station
has set the same group number and the same operating chan-
nels as you.
‘ ‘
Call-Ring
Sends the ring tones during transmit
mode.
➥
While pushing [PTT], push [DOWN]/[
Z
]
to send a ring tone.
• The ring tone is emitted while pushing
[DOWN]/[
Z
].
• The microphone signal is automati-
cally cut while pushing [DOWN]/[
Z
].
UP
DO
WN
MODE
POWE
R
UP
DO
WN
MODE
POWE
R
IC-446S-(5) 02.3.11 4:17 PM Page 19 (1,1)