Icom IC-2820H, Инструкция по эксплуатации

Страница: 85 / 164

64
6
MEMORY MODE OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
■
Memory bank selection
The IC-2820H has a total of 26 banks
(A to Z)
. All memory
channels, regular channels, scan edges and call channels are
assigned into the desired bank for easy memory management.
q
Push the desired band’s [M/CALL•MW] several times to
select memory mode, if desired.
w
Push and hold the same band’s [MAIN•BAND] for 1 sec.
• The memory channel number blinks.
e
Rotate the same band’s [DIAL] to select the desired bank,
A to Z.
• Banks that have no programmed contents are skipped.
r
Push the same band’s [MAIN•BAND] to set the bank
group.
• Bank initial and bank channel stop blinking.
t
Rotate the same band’s [DIAL] to select the desired bank
channel.
y
To return to regular memory mode, push and hold the
same band’s [MAIN•BAND] for 1 sec., rotate the same
band’s [DIAL] to select memory channel number indica-
tion, then push the same band’s [MAIN•BAND].
z
Push [MR/CALL] to select memory mode, if de-
sired.
x
Push [FUNC] then [
MONI
1(BANK)] to select
memory bank condition.
Or, push and hold [BAND] for 1 sec. to select
memory bank condition.
• Memory channel blinks
c
Push [
Y
]/[
Z
] to select the desired bank, A to Z.
• Only programmed memory bank can be selected.
v
Push [
CLR
A(MW)] to set the bank.
Or, push [BAND] to set the bank.
• Bank initial and bank channel stops blinking.
b
Push [
Y
]/[
Z
] to select the desired contents in
the bank.
n
To return to regular memory condition, push
[FUNC], [
MONI
1(BANK)] then push [
Y
]/[
Z
] to
select memory channel number indication.
Or, push and hold [BAND] for 1 sec., then push
[
Y
]/[
Z
] to select memory channel number indi-
cation.
BANK
Y
/
Z
Bank initial and bank
channel blink
[MAIN•BAND]