Icom IC-2820H, Инструкция по эксплуатации

Страница: 64 / 164

43
5
DV MODE OPERATION (Optional UT-123 is required)
D D
Repeater operation in the same zone
q
Set the desired repeater’s frequency, offset and shift direc-
tion in the main band.
(pgs. 30, 31)
• Select DV mode in advance. (p. 21)
w
Set your own call sign.
(p. 39)
• See p. 37 for your own call sign programming.
e
Set the desired station call sign.
(p. 40)
• See p. 38 for station call sign programming.
r
Set the repeater’s call sign as follows;
z
Push [
F
• ] twice to display the function guide 2.
x
Push [CS](V/MHz)
(Left band’s)
to display the “CALL
SIGN” screen.
c
Rotate [DIAL] to select “RPT1,” then push
[MAIN•BAND].
• RPT1 CALL SIGN screen is displayed.
v
Rotate [DIAL] to select the nearest repeater’s call sign
then push [BACK](V/MHz)
(Right band’s)
.
b
Rotate [DIAL] to select “RPT2” then push
[MAIN•BAND].
• RPT2 CALL SIGN screen is displayed.
n
Rotate [DIAL] to select the desired repeater’s
(in the
same zone)
call sign.
• Select “NOT USE
✱
” when not operating RPT2.
m
Push [BACK](V/MHz•SCAN)
(Right band’s)
to exit “CALL
SIGN” screen.
t
Push [PTT] to transmit; release to receive.