53
5
DV MODE OPERATION (Optional UT-123 is required)
D
D
Message Transmission
Select the message transmission function ON
(Ch01–05)
and
OFF. When a message channel is selected, the transceiver
transmits a text message
(pre-programmed)
.
(default: OFF)
q
Push [
F
•
] twice to display the function guide 2.
w
Push [MSG](LOW•PRIO) to display the “MESSAGE”
screen.
e
Rotate [DIAL] to select “TX MESSAGE,” then push
[MAIN•BAND].
r
Rotate [DIAL] to select the desired message channel.
• “Ch01” to “Ch05” available.
• See page 52 for message programming.
t
Push [BACK](V/MHz•SCAN)
(Right band’s)
to set the mes-
sage for transmission.
y
Push [BACK](V/MHz•SCAN)
(Right band’s)
again to return
to function guide 2 indication.
u
Push [PTT] to transmit the selected message.
• The message is transmitted each time [PTT] is pushed.
• The message is transmitted each 30 sec. automatically during
continuous transmission.
i
Release [PTT] to return to receive.
o
When the reply call with a message is received, the call
sign and the message displays alternately at the bottom of
the function display.
✔
For your information
The automatic received call sign and/or message indication
can be turned OFF in display set mode, if desired.
➥
RX CALL SIGN
(p. 108)
➥
RX MESSAGE
(p. 108)
NOTE: Only 1 message can be stored in the IC-2820H.
The received message is cleared by turning power OFF,
or overwritten when another message is received.
A transmitted message that includes lower case charac-
ters from the IC-2820H may not be decoded and displayed
correctly by the ID-800H, IC-V82/U82, etc.
Содержание IC-2820H
Страница 160: ...139 MEMO ...
Страница 161: ...140 MEMO ...
Страница 162: ...141 MEMO ...
Страница 163: ...142 MEMO ...