Icom IC-2710H Скачать руководство пользователя страница 65

Страница: 65 / 88

PAGER AND CODE SQUELCH

Waiting for a call from a specific station

➀

Push the desired band’s tuning dial.

➁

Set the operating frequency.

➂

Push [DTMF] to turn the pager function ON.

• “P” appears in place of the 100 MHz digit.
• An optional tone squelch can be used together with the pager

function, although the pocket beep cannot be used. (p. 54)

➃

Wait for a call.

• When receiving a call, the other parties’ ID or group code ap-

pears; “

” and the channel number blink as shown on the next

page.

•

DO NOT

push numeral keys on the microphone while a 3-digit

code is indicated, or code channel contents are changed.

➄

Push [PTT] to send an answer back call and display the
operating frequency.

➅

Push [DTMF] once to select the code squelch system or 2
times (or 3 times for U.S.A. version) to select the non-se-
lective calling system.

Push [BAND] to select the desired band, if nec-
essary.

Set the operating frequency.

Push [FUNC] then [

➃

PGR] to turn the pager

function ON.

• “P” appears in place of the 100 MHz digit.
• An optional tone squelch can be used together with

the pager function. (p. 54)

Wait for a call.

• When receiving a call, the other parties’ ID or group

code appears; “

” and the channel number blink

as shown on the next page.

•

DO NOT

push numeral keys on the microphone

while a 3-digit code is indicated, or code channel
contents are changed.

Push [PTT] to send an answer back call and
display the operating frequency.

Push [FUNC] then [

➄

C SQL] to select code

squelch or push [

CLR] to select the non-se-

lective calling system.

• Pushing [FUNC] then [

D-OFF] also selects the

non-selective calling system.

PGR

IC-2710H.qxd 02.2.8 16:55 Page 60 (1,1)

Содержание IC-2710H

























































































Результаты поиска

Содержание IC-2710H

Отзывы:

Бренды по названию

Популярные бренды

Icom IC-2710H, Инструкция по эксплуатации

Результаты поиска

Содержание IC-2710H

Отзывы:

Бренды по названию

Популярные бренды