Icom FP-561, Руководство по обслуживанию

Страница: 2 / 48

6-9-16, Kamihigashi, Hirano-ku, Osaka 547-0002, Japan
Phone : 06 6793 5302
Fax
: 06 6793 0013
Communication Equipment
Himmelgeister Str. 100, D-40225 Düsseldorf, Germany
Phone : 0211 346047
Fax : 0211 333639
URL : http://www.icomeurope.com
Unit 9, Sea St., Herne Bay, Kent, CT6 8LD, U.K.
Phone : 01227 741741 Fax : 01227 741742
URL
: http://www.icomuk.co.uk
Zac de la Plaine, Rue Brindejonc des Moulinais
BP 5804, 31505 Toulouse Cedex, France
Phone : 561 36 03 03
Fax : 561 36 03 00
URL : http://www.icom-france.com
Crta. de Gracia a Manresa Km. 14,750
08190 Sant Cugat del Valles Barcelona, SPAIN
Phone : (93) 590 26 70 Fax : (93) 589 04 46
URL
: http://www.icomspain.com
<
Corporate Headquarters
>
2380 116th Avenue N.E., Bellevue, WA 98004, U.S.A.
Phone : (425) 454-8155
Fax : (425) 454-1509
URL : http://www.icomamerica.com
<
Customer Service
>
Phone : (425) 454-7619
A.C.N. 006 092 575
290-294 Albert Street, Brunswick, Victoria, 3056, Australia
Phone : 03 9387 0666
Fax : 03 9387 0022
URL : http://www.icom.net.au
6F No. 68, Sec. 1 Cheng-Teh Road, Taipei, Taiwan, R.O.C.
Phone : (02) 2559 1899
Fax : (02) 2559 1874
3071 #5 Road, Unit 9, Richmond, B.C., V6X 2T4, Canada
Phone : (604) 273-7400
Fax : (604) 273-1900
URL : http://www.icomcanada.com
INTRODUCTION DANGER
ORDERING PARTS
REPAIR NOTES
This service manual describes the latest service information
for the FP-561 MARINE PLOTTER/SOUNDER and RD-200
DGPS BEACON RECEIVER at the time of publication.
To upgrade quality, all electrical or mechanical parts and
internal circuits are subject to change without notice or
obligation.
VERSION MODEL
FP-561
General
Europe
SYMBOL
GEN
EUR
NEVER connect the unit to an AC outlet or to a DC power
supply that uses more than 33 V (FP-561) or 16 V (RD-200).
Such a connection could cause a fire hazard and/or electric.
DO NOT expose the unit to rain, snow or any liquids.
DO NOT reverse the polarities of the power supply when
connecting the unit.
DO NOT apply an RF signal of more than 20 dBm (100mW)
to the antenna connector. This could damage the unit’s front
end.
Be sure to include the following four points when ordering
replacement parts:
1. 10-digit order numbers
2. Component part number and name
3. Equipment model name and unit name
4. Quantity required
<SAMPLE ORDER>
0910051392 PCB B-5305 FP-561 MAIN UNIT 1 pieces
8810004540 Screw BiH 3x8 SUS FP-561 Chassis 10 pieces
Addresses are provided on the inside back cover for your
convenience.
1. Make sure a problem is internal before disassembling
the unit.
2. DO NOT open the unit until the unit is disconnected from
its power source.
3. DO NOT force any of the variable components. Turn
them slowly and smoothly.
4. DO NOT short any circuits or electronic parts. An insulat-
ed turning tool MUST be used for all adjustments.
5. DO NOT keep power ON for a long time when the unit is
defective.
6. READ the instructions of test equipment thoroughly
before connecting equipment to the unit.
FP-561
RD-200
COVER 99.11.24 9:24 AM Page 2