manualshive.com logo in svg

Icom D-STAR ID-4100A, Основное руководство

Поделиться
Скачать
Icom D-STAR ID-4100A Скачать руководство пользователя страница 70

55

9

MAINTENANCE

New2001

New2001

BASIC MANUAL

 

■

Troubleshooting

The following chart is designed to help you correct problems which are not equipment malfunctions.

If you are unable to locate the cause of a problem, or solve it through the use of this chart, contact your nearest Icom Dealer or 

Service Center.

PROBLEM

POSSIBLE CAUSE

SOLUTION

REF.

Transceiver does not 

turn ON.

 •The power cable is improperly connected.

 •A fuse is blown.

 •Power source voltage is not correct.

 •Reconnect the DC power cable correctly.

 • Correct the cause, then replace the fuse 

with an equivalent fuse. (Fuses are installed 

in the DC power cable.)

 •Apply the correct 13.8 V DC.

–

p. 54

–

No sound comes from 

the speaker.

 •The audio volume level is too low.

 •The squelch is tightly closed.

 • The tone squelch is ON in the FM mode.

 • The external speaker is not connected.

 •The audio is muted.

 • Rotate [VOL] clockwise to obtain a suitable 

listening level.

 • Rotate [SQL] to the proper level to open the 

squelch.

 •Turn OFF the Tone squelch.

 •Reconnect the external speaker.

 • Hold down [MUTE] to release mute.

p. 19

p. 19

p. 20

p. 15

p. 10

Sensitivity is too low, 

and only strong signals 

are audible.

 • The antenna is defective or the coaxial 

cable connector is shorted or cut.

 •The Attenuator function is turned ON.

 •The squelch is set too tight.

 • Correct the cause, then reconnect to the 

antenna connector.

 •Turn OFF the attenuator.

 • Rotate [SQL] to adjust the squelch level.

–

p. 35

p. 19

Содержание D-STAR ID-4100A

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды