background image

New2001

43

New2001

New2001

SCAN OPERATION

6

BASIC MANUAL

 

VFO mode scan

1.   Push [V/M] several times until you enter the VFO mode.

2.   Hold down [SCAN] for 1 second.

 •Opens the Scan Type Select window.

 

L

 If you hold down [SCAN] for 3 seconds, the last selected 

scan starts.

3.  Rotate [DIAL] to select a scan type, then push [

ï

].

 •The scan starts.

  

 

L

The decimal point and the selected scan type icon blink.

 

L

 When receiving a signal, the S-meter displays the received 

signal strength.

4.  Push [SCAN].

 •Cancels the scan.

 

D

Scan type

The VFO mode scan has 6 scan types.

 •ALL: 

Full scan

 •BAND: 

Band scan

 •P-LINK0 ~ 9: Program link scan

 •P00 ~ 24: 

Program scan

 •DUP: 

 Duplex  scan 

(Displayed only when duplex is set.)

 •TONE: 

 Tone  scan 

(For the Tone Squelch scanning)

 

L

 The frequencies that are set as a Skip channel (PSKIP) 

are skipped during a scan. (p. 44)

 

L

 When the “Program Skip” item is set to “OFF,” the Skip 

channel frequencies are not skipped. (p. 29) 

(Scan > 

Program Skip

)

Scanning is a versatile function that can automatically 

search for signals. A scan makes it easier to locate stations 

to contact or listen to, or to skip unwanted channels or 

frequencies.

This section describes the basic scan operation.

TIP:

 • During a scan, rotating [DIAL] switches the scanning 

direction.

 • During a scan, you can change the operating band, scan 

edge, and so on, in the Quick Menu window.

 • The scan continuously runs, even if you push [MENU] or 

[QUICK] during a scan.

Содержание D-STAR ID-4100A

















































































Отзывы: