Programming (continued)
• Set time is displayed
8. Press the or button to change set time.
9. Press the button to advance to the next screen.
Note:
Transitions required after 11:59 PM must be programmed in the
next day’s MORN period.
• Heat temperature is displayed (50°F to 90°F)
10. Press the or button to adjust heat set temperature.
11. Press the button to advance to the next screen.
• Cool temperature is displayed (45°F to 85°F)
12. Press the or button to adjust cool set temperature.
13. Press the button to advance to the next screen.
Repeat steps 1-13 to program each day of the week individually or use the
Simpleset
®
feature (see
Page 26
) to program every day the same as Monday.
When programming is complete, slide the
System
switch to
Heat
or
Cool
to exit
Programming Mode
. Your
program schedule will be saved in memory and you will be returned to the
Off
mode.