Emergency Heat Test
1. Slide
System
switch to
Emer
position. Emer Heat mode screen is displayed (Emer LED lights).
2. Adjust set temperature so it is 5 degrees above room temperature.
3. Second stage heat should come on within a few seconds (Aux LED lights).
4. Adjust the set temperature 2 degrees below the room temperature and the heat should turn off. There
may be a fan delay on your system.
Fan Test
1. Slide
Fan
switch to
On
position.
2. Indoor fan turns on.
3. Slide
Fan
switch to
Auto
position.
4. Indoor fan turns off.
