0
Once the thermostat is installed, it should be thoroughly tested.
CAUTION!
:
Do not energize the air conditioning system when the outdoor temperature is below
50 degrees. It can result in equipment damage or personal injury.
Note:
Before testing the SC3201, move the
Fan Auto/On
switch to the
Auto
position.
Cool Test
1. Slide
System
switch to
Cool
position.
Cool
mode screen is displayed.
2. Adjust set temperature so it is 5 degrees below room temperature.
3. Air conditioning should come on within a few seconds.
4. Adjust the set temperature 2 degrees above the room temperature
and the A/C should turn Off. There may be a fan delay on your
system.
Note:
There is a four-minute time delay to protect the compressor
after it turns Off. To bypass the four-minute delay, slide the
System
switch to
Off
and back to
Cool
mode.
Heat Test
1. Slide
System
switch to
Heat
position. Heat mode screen is displayed.
2. Adjust the set temperature so it is 5 degrees above the room
temperature.
3. Heat should come on within a few seconds. Aux LED turns ON.
4. Adjust the set temperature so it is 2 degrees below the room
temperature and the heat should turn Off. There may be a fan delay
on your system.
Note:
There is a four-minute delay to protect your compressor. To
bypass the four-minute delay, slide the
System
switch to
Off
and back to
Heat
mode.
Testing the Thermostat
