ICM Controls SC 3006, Инструкция по установке, эксплуатации и применению

Страница: 3 / 23

Electrical Rating: • 24 VAC (18 to 30 VAC) • 1 amp maximum per terminal
• 3 amp maximum total load
Temperature control ranges: 45°F to 90°F Accuracy: ± 1°F
System configurations: 1-stage heat, 1-stage cool, heat pump, gas, oil, electric
Timing: Anti-short Cycle : 5 minutes
Backlight Operation : 10 seconds
Terminations:
C, RH, RC, W, Y, B, O, G, S1, S2
Specifications
WARNING!
: Always turn off power at the main power supply before installing, cleaning, or removing
thermostat.
• This thermostat is for 24 VAC applications only; do not use on voltages over 30 VAC
• Do not short across terminals of gas valve or system control to test operation; this will damage your
thermostat and void your warranty
• All wiring must conform to local and national electrical and building codes
• Do not use air conditioning when the outdoor temperature is below 50 degrees; this can damage your
A/C system and cause personal injuries
• Use this thermostat only as described in this manual
Important Safety Information
Package includes: SimpleComfort
®
3006 programmable thermostat on base, labeled thermostat cover,
wiring labels, screws and wall anchors, Installation, Operation and Application Guide.
Tools required for installation: drill, hammer, screwdriver.
Package Contents/Tools Required