7
Operating principles of robot cleaner
Principles of Vacuum Cleaning Robot
This product recognizes the ceiling and obstacles with camera and various sensors, and cleans by making a virtual
map in CPU installed in the main body. It operates by drawing the most efficient map with self-decision of the finished
cleaning area and the area to clean. (Camera navigation is disabled in random mode.) With about 20 detection sensors,
it can avoid wall or objects (chair, vase, etc)
It climbs a door sill of up to 0.79 in, and floor sensors help it to avoid falling down stairs. Be careful that pets or
children do not force the robot to fall by playing with it.
Suction of robot cleaner
This product has one main brush, two side-brushes and a vacuum suction. The dust on the floor is gathered by the
rotating side brushes, and is swept into the dust bin by the rotating main brush.
For effective cleaning
Please follow the instructions below for high cleaning efficiency.
- Empty the dust bin after each use of the robot cleaner.
- Use Magnetic strip to confine the robot to an area or by closing the door.
(Refer to P.10 How to install entrance prevention tape)
- Set the magnetic strip not too far apart from the floor.
- Remove all the non-fixed objects such as toys, magazines or shoes before cleaning.
- Do not lift up or move the robot cleaner manually while operating.
( If you do this, the robot loses its way and skips areas.)
- Make sure to charge with manual charging for at least 1 hour before using the vacuum cleaning robot
for the first time. (Refer to P.9 How to charge manually)
●
R
e
fe
re
n
c
e
Содержание YCR-M05
Страница 14: ......