background image

3

- Do not touch the power cord or the charger with wet hands.

   → It may cause electric shock.

-  Arrange any cables or wires before use to avoid them being wrapped or 
   caught by the robot

   → It may cause fire or electric shock due to damaged cable.

-  Remove light objects or fibers before use.

   → It may cause barrier or damage the object or clothing while robot is in use.

- Remove small or fragile objects from the cleaning area before use.

   → Fragile pottery or glass product must be removed.
   → Remove coins or expensive jewelries before cleaning.

- Tidy & remove objects from the floor.

   → Power cords, thin wires like phone chargers, pad, belts, thin towel, mats placed in front 
       of the bathroom sink, entrance, utility room may get tangled with the wheel. Also table 
       cloths, objects on the table or dining table may fall down.

- Empty the dust bin before operating the robot cleaner.

   → Suctioning function may not perform well if dust bin is full.

- Check the main components such as antibacterial filter, brush 
   and dust bin are assembled properly before cleaning.

   → In case you operate the robot cleaner without the main components 
       such as antibacterial filter or brush, it won’t clean and it may cause breakdown.

- Do not operate robot cleaner when children or pets are left alone.

   → Robot cleaner may draw attention from children or pets. The children or pets may hurt 
       themselves by playing with the wheels. If the robot cleaner is distracted while cleaning, 
       it will recognize it as a barrier and certain areas may not be cleaned.

- Do not expose the power cord on the floor when installing charging station.

   → Robot cleaner may drag the power line while auto-charge or cleaning.

- Keep the top of the charging station away from water.

   → It may cause electric shock or fire.

Warning

Warning

Warning

Prohibition

Caution

Caution

Caution

Caution

Caution

Caution

 S

a

fe

ty

 p

re

c

a

u

ti

o

n

s

Precautions

 

before

 

using

Содержание YCR-M05





















Отзывы: