Icidu SI-707139, Инструкция по эксплуатации

Страница: 24 / 48

TV Connection
20
2. Press the Power switch and then the blue LED will glow with low luminance. Press
( STANDBY ) button on the remote to activate this device for playback.
Activating the Device for Playback
1. Turn on your TV and AV receiver.
2. Press the Power switch to turn on this device, and then press ( STANDBY ) button on
the remote control to activate it. The activation takes about 5-7 seconds, and the LED will
blink at the same time.
3. After the LED stops blinking and glows steadily bright, this device is ready to use for
playback.
4. After playback, press the ( STANDBY ) button again to return to Standby mode.
5. If you want to move this device, turn off this device by pressing the Power switch until the
orange LED is turned on. Release the switch, and then it will be safe to remove all
connections after both LEDs are off.
•
When using the remote control, point the remote control towards the remote
receiver.
•
During the remote control operation, the inhibit icon will appear on the
screen when a button of non-available operation is pressed.
•
If the setting of the video output is incorrect, the TV screen will not display
normally. Switch to correct setting by holding and then press MENU . (See
page 39 for more detail).