T-CAM 80 P-SERIES/T-CAM 160 XT USER MANUAL
26
9-23 Factory Settings
If measurements are skewed the user should try adjusting the emissivity and ambient
temperature before attempting to restore factory setting. Restore default settings as follows:
1.
Press the Menu button.
2. Highlight Settings from the Menu.
3. Press the Select button. A sub-menu will open.
4. Highlight Factory Set from the sub-menu.
5. Press the Select button.
6. Press the Ok button to confirm reset. Menu automatically closes to perform reset. Press
Cancel to exit without changes.
Item
Parameter
Value
Measurement
Center Spot Measurement
off
Hot Spot Measurement
off
Cold Spot Measurement
off
Parameters
Emissivity
0.95
Reflective temperature
25 °C
Image
Mode
Infrared
Palette
Iron
Adjustment
Auto
System Setting
Language
English
HDMI Output
off
Laser
off
Lamp
off
Factory settings of the imager are as follows:
PERFORMING A FACTORY RESET ERASES CUSTOMIZED USER
CONFIGURATIONS STORED ON THE DEVICE AND RESTORES
THE ORIGINAL DEFAULT SETTINGS PROGRAMMED BY THE
MANUFACTURER. THE PROCESS CANNOT BE UNDONE.
PERFORMING A FACTORY RESET WILL ERASE ANY IMAGES SAVED
DIRECTLY TO THE DEVICE. A FACTORY RESET WILL NOT FORMAT
THE MEMORY CARD HOWEVER USERS MAY WISH TO REMOVE IT
BEFORE ATTEMPTING A FACTORY RESET OF THE DEVICE.
