T-CAM 80 P-SERIES/T-CAM 160 XT USER MANUAL
22
9-16 Measurement Tracking
Tracking is available for locating the specific temperature points. The measurements display
in the upper right corner. Users can track the following points:
Spot:
measures the center point temperature.
Hot:
captures the maximum temperature.
Cold:
captures the minimum temperature.
Enable settings as follows:
1.
Press the Menu button.
2. Highlight Measure from the Menu.
3. Press the Select button. A sub-menu will open.
4. Highlight desired tracker in the sub-menu.
5. Press the Select button to enable the corresponding measurement. The icon means
the point is enabled. The icon means it is disabled. The Menu automatically closes
after selection and must be reopened to verify changes have occurred.
THE THERMAL IMAGER NEEDS SUFFICIENT WARM-UP TIME
FOR THE MOST ACCURATE TEMPERATURE MEASUREMENTS
AND BEST IMAGE QUALITY. THIS TIME CAN OFTEN VARY BY
ENVIRONMENTAL CONDITIONS. IT IS BEST TO WAIT A MINIMUM
OF 10 MINUTES FOR THE DEVICE TO COMPLETELY WARM-UP.
THE HOT AND COLD SPOT TEMPERATURE TRACKERS WILL
BOUNCE AROUND THE SCREEN TO DETECT TEMPERATURES AS
THE USER MOVES THE DEVICE ACROSS A SCENE. TO GET STABLE
RESULTS IT IS BEST PRACTICE TO HOLD THE DEVICE IN A STABLE
POSITION WHILE TAKING MEASUREMENTS. USE OF A TRIPOD IS
HIGHLY RECOMMENDED.
