ICI BUMPER INSTALLATION
STEP 19
Install the ICI winch carrier to
the frame of the vehicle. With
help, carefully hold the winch
carrier up to the front frame
and use the eight 14mm
socket head bolts removed in
STEP 9 to attach the winch
carrier to the frame. Do not
fully tighten these bolts yet.
STEP 20
Use the provided M12 bolts
and flat washers on the
lateral holes of the winch
carrier to fix it to the frame.
With these bolts in place and
tightened, proceed to
tightening the 8 bolts in STEP
19.
Figure 19.
STEP 21 (WINCH)
Be sure to take caution with
the AC and cooler lines. If a
line is making contact with the
winch, you will need to adjust
it/them to avoid damaging it.
These lines can be gently bent
by hand, but it may be
necessary to unbolt the line.
NOTE: Be careful and
only proceed at your own
discretion.
Figure 21.
10
11
STEP 16
Clean up the edges with a light
sanding and remove all the
masking tape.
ICI BUMPER INSTALLATION
STEP 17
With the edges sanded, the
bumper cover is ready to be
reassembled and remounted
to your truck. You will need to
reinstall the components of
the following steps in this
sequence: STEP 12, STEP 8,
STEP 7, STEP 4, STEP 2, and
STEP 3.
STEP 18 (WINCH)
If you have a winch, now is the
time to mount it to the carrier.
Be sure to use the hardware
provided with your winch. This
carrier is designed to fit most
winch brands, it may be
necessary to relocate the
solenoid control box
depending on the winch brand
and style.
Figure 18.
Figure 17.
DISMOUNTING THE OEM BUMPER
Figure 1
6
.
Figure
20.