manualshive.com logo in svg

ICI AL-FBM71TYN-RT, Инструкция по установке и использованию, Страница: 1 / 8

Поделиться
Скачать
ICI AL-FBM71TYN-RT Скачать руководство пользователя страница 1

Alumilite Front Bumper

part# AL-FBM71TYN

-RT

DIRECTIONS FOR INSTALLATON & USE

2014 - 2021 TOYOTA 4RUNNER

For technical support, call 1-800-626-8746

or

visit icionline.com to download color instructions

WARNING:

FAILURE TO COMPLY WITH INSTALLATION, 

SAFETY, AND PRODUCT USE INSTRUCTIONS MAY RESULT 
IN SERIOUS BODILY INJURY OR DEATH.

IMPORTANT NOTES

The  contents  of  this  installation  and  operation  manual  should  be 

read  and  comprehended  before  initializing  the  installment  of  the 

above listed product.  This  will  help  minimize  risk  to  injury  through 
the installation process and through the operation of the product.

TABLE OF CONTENTS

2. PARTS AND TOOLS REQUIRED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 03

4.     DISMOUNTING THE OEM BUMPER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .05-10
5. ICI BUMPER INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-14

3. REFERENCE DIAGRAMS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .04

1. SAFETY, WARNINGS, AND OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 02

6. SOCIAL  MEDIA REFERENCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Содержание AL-FBM71TYN-RT









Отзывы:

Нет отзывов