General information
6
a
DANGER
–
Danger deriving from the fuel.
Sensing the presence of fuel in the thermal power plant, it is appropriate to follow the
precautions below to avoid the risk of explosions and fires:
-
do not smoke or cause sparks
-
do not turn on lights or electrical devices in general (mobile phones)
-
open doors and windows
-
close the fuel shut-off valve normally placed outside the thermal power plant
-
disconnect the electrical power supply by using the switch normally placed outside the thermal power plant.
–
Danger of burns.
During normal operation, the generator has hot parts that, upon accidental contact without suitable
personal protection, can cause serious burns. Potentially hot parts include:
-
accessories and valves connected to the generator
-
door and smoke chamber
-
upper tread walkway.
–
Danger from fumes.
An incorrect adjustment of the closing door or an insufficient draught in the flue can leave fumes
inside the thermal power plant, causing fatal intoxication deriving from carbon monoxide which, by its nature, is colourless
and odourless. Therefore, ensure the generator is properly installed and adjusted and the presence of ventilation openings
in the thermal power plant are compliant with the regulations in force.
IDENTIFICATION
Each generator
SIXEN
is identified by the following nameplates:
–
Boiler body nameplate (1)
: this plate carries the boiler body main data and is riveted on a special support.
–
Assembly nameplate (2)
: this plate carries the data relating to the boiler complete with the accessories, which may vary from
those of the boiler body only.
1
2
The appliance is also accompanied by
construction certificate
attesting the successful result of the hydraulic test.
m
IMPORTANT
The installation must be carried out in compliance with the local applicable regulations by
professionally qualified
personnel
, ie personnel having specific technical skills in the steam production system component sector. An incor-
rect installation can harm people or damage property for which the manufacturer cannot be liable.
During
commissioning
check the effectiveness of all adjustment and control devices in the control panel.
The
warranty
validity is subject to compliance with the instructions in this manual.
Cooke Industries - Phone: +64 9 579 2185 Email: [email protected] Web: www.cookeindustries.co.nz
