-12-
iCharger Synchronous Balance Charger/Discharger 3010B
LiPo Termination
Voltage 4.20V
LiFe Termination
Voltage 3.60V
Delay 0min
Lilo Termination
Voltage 4.10V
-
Dec
+
Inc
-
Dec
+
Inc
-
Dec
+
Inc
Pb Termination
Voltage 2.40V
-
Dec
+
Inc
Inc
Dec
Inc
Dec
Inc
Dec
Termination voltage for LiFe. Adjust LiFe‘s charge termination voltage.
Press
Start/Enter
for more than 3 seconds to blink the ―Voltage‖ value,
then press
Dec
and
Inc
to adjust the termination voltage.
Range: 3.40V
–
3.90V, Step: 0.01V (3.60V, default)
Termination voltage for Lilo. Adjust Lilo‘s charge termination voltage.
Press
Start/Enter
for more than 3 seconds to blink the ―Voltage‖ value,
then press
Dec
and
Inc
to adjust the termination voltage.
Range: 3.90V
–
4.20V, Step: 0.01V (4.10V, default)
Termination voltage for LiPo. Adjust LiPo‘s charge termination voltage.
Press
Start/Enter
for more than 3 seconds to blink the ―Voltage‖ value,
then press
Dec
and
Inc
to adjust the termination voltage.
Range: 4.00V
–
4.30V, Step: 0.01V (4.20V, default)
Termination voltage for Pb. Adjust Pb‘s charge termination voltage. Press
Start/Enter
for more than 3 seconds to blink the ―Voltage‖ value, then
press
Dec
and
Inc
to adjust the termination voltage.
Range: 2.20V
–
2.50V, Step: 0.01V (2.40V, default)
Note:
The Termination voltage controls the transition from Constant
Current (CC) to Constant Voltage (CV) charging for LiXx and Pb
chemistries. It also defines the per-cell limit for cell overvoltage detection.
If you change the default termination voltage, the charge and discharge
setting screen will note this difference by alternatively blinking battery‘s
type and setting voltage value.
Inc
Dec
Содержание 3010B
Страница 1: ......
