icetro IM Series, Инструкция по установке и обслуживанию

Страница: 33 / 52

33
IM-Series
Service Tips
Item Display Description
Set range Default
Initial Drain Time
Adjust initial drain time.
0 ~ 30 sec
(by 1 second)
20 sec
Drain Time after Harvest
Adjust drain time after harvest.
0 ~ 90 sec
(by 1 second)
10 sec
Drain Time after ICE Making
Adjust drain time after making ice.
0 ~ 30 sec
(by 1 second)
10 sec
Water Supply Delay Time
Adjust the delay time after detecting high water level.
(0.5 seconds)
Maximum water supply time: 5 minutes
If high water level has already been detected
when the water is supplied, the delay is not applied.
0 ~ 30 sec
(by 1 second)
15 sec
(Different by
model)
Harvest Assist
Temperature
(Optional) With hot gas, run the sub-motor if the
preset condenser temperature is
exceeded.
-56 ° ~ 138 ° F
(by 1 ° F)
0 ° F
Pump Standby Time
during Ice Making
(Optional)
Stops pump for the preset time when the
water temperature in the water vessel
turns to 0
℃
.
0 ~ 120 sec
(by 1 second)
15 sec
Temperature Selection
Choose Celsius or Fahrenheit. ℃ / ℉ ℃
Water Vessel
Water Temp. (Optional) Displays current water temperature in
the water vessel.
-56 ° ~ 138 ° F
(by 1 ° F)
N/A on IM
Condenser
Outlet
Temperature
Display current temperature at the
condenser Outlet.
32 ° ~ 212 ° F
(by 1 ° F)
Evaporator
Inlet
Temperature
Display current temperature at the
evaporator Inlet.
-56 ° ~ 138 ° F
(by 1 ° F)
Evaporator Outlet
Temperature Display current temperature at evaporator
outlet
-56 ° ~ 138 ° F
(by 1 ° F)
Flexible Numeric Display (FND) Functions