manualshive.com logo in svg

icetro IM-0350 Series, Руководство пользователя, Страница: 5 / 56

Поделиться
Скачать
icetro IM-0350 Series Скачать руководство пользователя страница 5

5

Warning

◆ It may cause the fire or extraordinary operation, and would result
    in the serious problem.

◆ Injury to the child or damage to the icemaker may occur.
◆ Let them avoid hanging onto the front door of the model when it is open.

◆ It may cause an electric shock.

◆ It may cause the damage of colling system ice storage part 
    or electrocution.

◆ There is a danger of a current leak, electric shock and/or fire
◆ Be sure to contact the customer service center if the power cord
    or plug gets peeled or damaged.

Do not disassemble
Do  not  modify  the  parts  of  icemaker,  and  repair 
without an authorized person

Prohibition
Do not let children hang on the door of the icemaker.

Do not touch
Do not touch or disconnect the power cord 
with wet hands.

Do not touch
Do not clean the inside the ice maker with sharp tools.

Prohibition

Do not bend the power cord severely, or allow it to be 
pressed by a heavy matter, which can cause damage 
to the cord.

Содержание IM-0350 Series

























































Отзывы:

Нет отзывов