ICETEAM 1927 COMPACTA VARIO US, Инструкция по эксплуатации

Страница: 25 / 54

Compacta VariO US
- 25 -
Compacta VariO US - 2018/05 - Rev. 01
EN
STOP Button
By pressing STOP the machine is idle and the relevant LED is on. From Stop
condition, it is possible to access User Programming.
From Stop, press and hold STOP button to read the machine event log.
SET BEATING SPEED button (batch freezer)
By pressing
Compacta 4
button from Freezing, Extraction or Beating, Increase
and Decrease LEDs turn on and, using the relevant buttons, it is possible to
change Beating speed.
BEATING / EXTRACTION Button
Beater function:
Pressing the Beater key in Stop mode, the Beater is activated for 1 minute. The
display visualises:
Timer 01:00 VEL3
Pressing the key once, slow beating (speed 3) is activated and on the left the
display visualises the decreasing timer and on the right the beater speed. When
the time has expired, the machine goes into Stop mode.
Pressing the
Compacta
8 Vari
elite
key, the LEDs of the Increase/Decrease keys light up. Using
the Increase/Decrease keys, modify the speed of the beater motor from 1 to 7.
Extraction function:
Pressing the Whipping key, access is gained to the Extraction function. The beater
is activated at speed 7 (programmable at step U11).
The Extraction function can only be activated from the Whipping function and
not from Stop mode. Beating time during extraction is 5 minutes.
The display visualises:
15:26:14 Mon
Timer 03:00 VEL7
Pressing the
Compacta
8 Vari
elite
key again, the speeds set at steps U11 and U12 are alter-
natively activated.
Pressing the
Compacta
8 Vari
elite
key, the Increase/Decrease LEDs light up and using these
keys, the speed of the beater can be modified from G, 1, 2 to 7, where G is the
speed of the Slush cycle (only for the Compacta Vario version).
Coolde Extraction
Once Extraction has been activated from the Whipping function, pressing the
key
Compacta
8 Vari
elite
again, a cooling cycle of the product is activated (EVF ON - MC
ON) during extraction that finishes when the timer expires that depends on the
cycle and the load in execution.
The LED of the Whipping key lights up during the activation of the cooling cycle.
4.2.4 Operator functions
BATCH FREEZER section (lower part)
The lower part of the machine concerns the batch freezer and the relevant messages are displayed
on the second line.
Compacta 4
Compacta 4
Compacta 4