www.ICELED.co.uk
ZAP+
+
+
+ GUIDE v1
6
Beat to colour
In this mode a microphone inside the control box is used to pick up the beat of a
music track and change the colour in time with the beat. In between beats it is
possible to have the light fade away to a reduced level. The two buttons can be used
to adjust this level:
Strobe
This mode provides a variable rate strobe function. It is also sensitive to sound so
that it can be seen to react to a music beat. Each music beat doubles the flash rate
on the beat to make it stand out. The basic flash rate is set using the two buttons:
Factory reset
To restore the default values for
all settings
hold down both buttons when in
Standby mode. Initially the standby LED will go out, then, after a pause of several
seconds it will light once more. At this point the settings have been returned to the
factory defaults and the buttons can be released.
Fade level
Press and
hold
either button to change the level to which the light fades between beats. Blue
reduces the level while red increases it. Note that the flash pattern of the mode LED changes
when either the maximum or minimum levels are reached.
Flash rate
Press and
hold
either button to change the strobe rate. Blue slows down the strobe while red
speeds it up. Note that the flash pattern of the mode LED changes when either the maximum
or minimum levels are reached.