www.ICELED.co.uk
ZAP+
+
+
+ GUIDE v1
2
Features
ICELED ZAP+ is a compact handheld controller for use with all ICELED light-sources.
It is capable of generating a number of automated lighting programs as well as
providing direct manual control of the colours displayed. The modular nature of
ICELED products also allows ZAP+ to be connected in-line with any other ICELED
controller in order to provide instant access to overriding effects.
ZAP+ can also be used to operate the ICELED full-colour scanner, providing access
to several built-in patterns and sound reactivity (see the Scanner manual for details).
Installation
The junction box should be secured to a suitable panel somewhere out of sight. It
should be located in a position that will make the control box accessible without
stretching the lead joining the two.
Two out of the three wires from the input cable should be attached to a 12 Volt DC
supply. Red is for connection to a fused +12 Volt source and Green for connection to
chassis earth. The Blue wire is an optional data input for connection to another
ICELED controller. If this is unused it should be left unconnected. ICELED light-
sources connect to the three-way output terminals as shown:
Output
terminals
Input cable
Junction box
Control box
Supply fused
at no more
than 5 Amps
Any ICELED light source(s)
with a combined load not
exceeding 3 Amps
+12 VDC
Chassis
Optional data connection to
UFO ‘I’ terminal
If ZAP+ is to be used to override a UFO
or ZEN output then all three wires in the
input cable can be connected directly to
the channel or zone as shown left.
Standby LED
Mode
LEDs